• DF 300
  • DF 300
  • DF 300

The DF 300 Motor was developed for the following functions: dental prosthesis' cutting, wearing and polishing. The intended use of this equipment is to assist the professional called "prosthetic" during the dental prosthesis' manufacture and / or change. Use for veterinary purposes and also for podiatry. Comes with anti-dust, electric and armored high speed handpiece.

• Power supply: 127Vac or 220Vac with selector switch;
• Frequency 60Hz;
• Variable handpiece speed from 2000 to 35000 RPM;
• Maximum torque of 400 gf / cm (4.00 Ncm);
• Speed indicating system by leds;
• Speed adjustment is done through a potentiometer, with its total speed range divided in 14 steps;
• It has two buttons, one to change the direction of rotation and the other to set the handpiece drive, via keyboard or pedal. All the buttons' functions are indicated by the respective LED.

• Drill stem size - 2.35mm according to ISO7785-2;
• Drill stem adjustment minimum length - 10mm;
• Projection o mandrel maximim length - 35mm.