Beta-Air

Beta-Air

It is a high speed handpiece made of brass and aluminum , chrome , anodized and with few lines , which ensures excellent design, ergonomics and ease of sterilization .

Add to the budget
  • Beta-Air
  • Beta-Air

It is a high speed handpiece made of brass and aluminum , chrome , anodized and with few lines , which ensures excellent design, ergonomics and ease of sterilization . It consists of high-precision components such as bearings, mounted on rubber bearings to minimize vibrations and rotor made of aluminum, whose design makes it easy to gain speed.

Lightness , being almost entirely built of aluminum.
Low noise .
High torque , which provides greater performance at work the prosthetic .
It has a plastic, padded case with foam , thus ensuring greater safety in storage and transport.

Borden connection ( 2 holes )
Air consumption 40 l / min ( ± 2 )
Speed 350,000 rpm ( ± 10%)
Operating pressure 30 to 40 PSI
Product body diameter 17.3mm
Total length of 115mm product
Drill diameter to be used 1:59 to 1.60mm
Clamp Friction Grip ( FG )

INDICATIONS:
Indicated to assist the prosthetic professional in manufacturing and / or alteration of dental prostheses, such as eg : up, wear , cutting and polishing of the prosthesis .

AREA OF USE :
Dental lab

1. Installation
• Snap BETA AIR TURBINE to modular terminal (eg Beta Air Modular) noting the orientation of the ducts;
• Thread the end of the modular terminal set for the equipment;
Note: The modular terminal must be manufactured in accordance with ISO 9168.

2. Insert and remove the drill:
2.1. Friction Grip Model (FG)
• Insert the drill manually in forceps, hold the pen body and push the bag drills until the drill fitting the shaft;
• Holding drills bag and throw the glove in the opposite direction to the bag drills. Thus, the drill bit drills leave within the bag;
Note: Use tubes that are to your measurements according to the ISO 1797-1 standard.

3. Lubrication:
• Use white mineral oil lubricant at the dental hand instruments (eg Flexlub);
• Keep the lube bottle upright and the applicator in the supply air;
• inject lubricant for 2 seconds.
• Lubricate twice daily.
Note: To remove excess lubricant, engage BETA AIR TURBINE for 15 seconds.

• Read the instructions at the product before using it;
• Do not wash the product in ultrasonic cleaners and / or chemical sterilization;
• Use dry compressed air, filtered and free compressor lubricant.

WARRANTY:
Factory Warranty: valid only for the first owner, upon presentation of the Purchase Invoice. Condition: manufacturing defect.
Term: 3 (three) months from the date of issuance of the respective sales receipt for the same.
Legal guarantee: ending the manufacturer's warranty or product being sold by the first owner, there will still be the legal guarantee of ninety (90) days.

Remarks:
Any warranty may be provided additionally by the distributor to the end customer shall be borne exclusively by the same and are not the responsibility of Dentflex.
Parts replaced as a result of the guarantee will be owned by Dentflex.
Search the list of Authorized Technical Assistance Dentflex at the web site www.dentflex.com.br.

Warranty loss reasons:
• Installation and / or operation in disagreement with the Manual of Instructions.
• Product repair attempt by unauthorized persons.
• Lack of lubrication or inadequate lubrication.
• Fall.

Items not covered by warranty:
• Technical offset expenses or outbound freight / around the product.
• Damage to the exterior finish and / or accessories.